Applications: Sediment Automatic Detector
The sediment detectors measure sediment thickness in construction projects such as transportation, municipal works, water conservancy, and power. They work in dry holes and slurry walls, providing fast, accurate, and real-time data to improve quality control.
Introduction
The ST-70 and ST-90 sediment automatic detectors adopt a self-developed, non-contact electromagnetic induction vernier depth gauge design. Utilizing gravity and vibration, the probe is driven into the sediment layer. The sediment thickness is determined by measuring the relative displacement between the probe’s movable outer ring, which presses against the sediment surface, and the probe’s bottom. Measurement accuracy is corrected by the built-in tilt sensor, and hole depth is determined by the length of the lowering wire.
It is applicable to transportation, municipal works, housing construction, water conservancy, electric powerand other scenarios. lt can adapt to dry holes, slurry walls, and other conditions. Combined with wireless data transmission and Al analysis capabilities, it greatly improves construction quality control efficiency.
Features of Sediment Automatic Detector
(1) Portability: Lightweight design for single-operator use in limited access
(2) Custom Solutions: Configurable ranges; compliant with ISO standards, no recalibration required
(3) Automation: AI-driven measurement eliminates manual errors
(4) Instant Results: On-site detection and real-time data output to accelerate workflows
(5) Uninterrupted Operation: Hot-swappable batteries ensure 24/7 field readiness
Specification of Sediment Automatic Detector
| Measuring range | – Sediment thickness measurements:0 ~152.5mm – Pile borehole depth measurement: 70m and 90m; (Expandable to 100+m via future development) |
| Accuracy and resolution | – Sediment thickness measurement: Accuracy: 3mm Resolution: 2.5mm – Pile borehole depth measurement: Accuracy: 5mm Resolution: 0.01mm |
| Mode of communication | – Bluetooth communication range: 4m – 4G Communication: Unlimited range within 4G signal coverage |
| Power supply | – Battery capacity: 10,000mAh – Battery type: High-density rechargeable lithium battery – Working hours: Under full power conditions, measuring a 40m pile borehole as an example, the device can measure 22 pile boreholes |
| Detection time | Measurement time for a 50m pile borehole takes only 3 minutes |
| Parameter setting | – Display Capacitive Touch Settings – Button Settings |
| Dimensions Weight | – Ground host: 422*296*542mm (L*W*H) Weight: approximately 7.3 kg – Sediment thickness measuring probe: Diameter 60mm, height 460.5mm Weight: approximately 1.8 kg |
Note:
(1) Ground Control Unit:
· High-capacity battery (10,000mAh) supports fast charging and sustained high-intensity operation
· Interactive interface with touchscreen and physical buttons for real-time monitoring and control
(2) Sediment Detection Probe:
· Integrated tilt sensor guarantees 士lmmprecision in sediment measurement
· Compact design (small diameter) enablesdirect access to bedrock at pile bases
Jobsite Applications
FES sediment detector is on site
